OverBoards are designed with the same classic architectural details that have graced fine homes for centuries. From Colonial to Victorian, Craftsman to Contemporary, OverBoards will bring out the best in your home.

Traditional

Traditional Colonial 3/8” raised panels, with a quarter-round border framed by 1” stiles and rails.

Shaker

Simple Shaker-inspired flat cabinet, with a quarter-round border framed by 1” stiles and rails.

Traditional Designer

The designer style was developed for a cleaner look. These are available in the traditional and shaker style panels.

Shaker Designer

The designer style was developed for a cleaner look. These are available in the traditional and shaker style panels.

Products & Accessories

OverBoards' End Caps and Corners are available in each of the three classic styles.

Left Traditional End Cap

This end cap design can only be used with the “Traditional” style main panel.

Right Traditional End Cap

This end cap design can only be used with the “Traditional” style main panel.

Left Wall-to-Wall End Cap

This end cap design can only be used with the “Traditional” style main panel. The wall-to-wall end caps were designed for applications where the pipe continues through the wall.

Corner

Inside and Outside corners are available in any style.

Left Designer End Cap

This end cap design can only be used with the “Traditional” style main panel.

Right Designer End Cap

This end cap design can only be used with the “Traditional” style main panel. We do not offer wall to wall “Designer” end caps. We recommend using the main panel only in a wall to wall application, if you’re going for the “Designer” look.

Standard End Cap Comparison

When there is baseboard trim in the room, we can offer to notch the end cap to accommodate the trim. This allows for a straight to be done as opposed to coping around the design on the bottom of the end cap.

3″ Fin Tube Bracket

The fin tube bracket is available for when your existing fin and tube is not being supported.

Left Shaker Designer End Cap

This end cap design can only be used with the “Shaker” style main panel.

Right Shaker Designer End Cap

This end cap design can only be used with the “Shaker” style main panel. We do not offer wall to wall “Designer” end caps. We recommend using the main panel only in a wall to wall application, if you’re going for the “Designer” look.